DGT catheter protective sleeve

Product Classification：Conduflex and Mobiflex Cable C

Characteristic：DGT catheter protective sleeve Structure and use:The outer diameter of the outer panel is plated with chrome.

DGT catheter protective sleeve Structure and use:

The outer diameter of the outer panel is plated with chrome. It is made of stainless steel and plastic, including engineering plastics, reinforced nylon 66 and fiber. The steel plate is not polished by steel and rust, and is made of engineering plastics. It has the advantages of reasonable structure, high strength, invariable type and beautiful appearance.

It is easy to install and is suitable for machine tools and electrical appliances, protection of hydraulic steam pipeline and the overall modeling of decorative beauty host. To ensure the safety of operating personnel and enhance the competitiveness of China's machine tools and machinery in the international market.

Type DGT catheter protective sleeve selection:

Indicate the specifications and models as follows:

The 1#1200-A- II or 25 x 45 x 1200-A- II

The 3#1800-AB- III or 52 * 102 * 1800-AB- III

Please pay attention to specifications, models, assembly forms A, B, C, D.

Specification parameter table:

Model	1#	2#	3#	4#	5#	6#	7#
Spec	25×45	38×73	45×90	52×102	60×120	60×150	72×162
Appearance	39×62	53×91	61×108	70×122	81×144	81×184	93×186
Bending radius	60	100	120	140	160	165	185
Non supporting length M	1.5	2	2.2	2.5	2.7	2.9	3.0
Load weight	3	4	5	8	10	14	20

A type joint Specification parameter table
Model/Spec	h	b	e	d1	l1	l2
25×45	39	57	22	F6.5	30	15
38×73	53	91	50	F6.5	30	15
45×90	61	108	62	F6.5	35	15
52×102	70	122	65	F8.5	40	20
60×120	81	144	70	F8.5	40	20
60×150	81	184	80	F8.5	40	20
72×162	93	186	100	F8.5	45	20

B type joint Specification parameter table
Model/Spec	h	b	e	d1	l1	l2
25×45	39	57	75	F6.5	30	15
38×73	53	91	105	F8.5	35	120
45×90	61	108	128	F8.5	40	137
52×102	70	122	140	F8.5	40	160
60×120	81	144	155	F8.5	45	167
60×150	81	184	188	F8.5	45	197
72×162	93	186	200	F8.5	45	226

C type joint Specification parameter table
Model/Spec	h	b	eb	d1	l1	eh	h2
25×45	35	57	18	F6.5	30	55	80
38×73	50	85	45	F6.5	35	70	95
45×90	a 114	103	52	F8.5	42	87	102
52×102	65	114	60	F8.5	40	90	115
60×120	73	132	68	F8.5	42	103	123
60×150	73	163	83	F8.5	44	103	123
72×162	85	175	95	F8.5	45	110	135

D type joint Specification parameter table
Model/Spec	h	b	e	d1	l1	l2
25×45	39	57	22	F6.5	60	15
38×73	53	91	50	F6.5	65	15
45×90	61	108	75	F6.5	65	15
52×102	70	122	82	F8.5	70	20
60×120	81	144	100	F8.5	70	20
60×150	81	184	130	F8.5	70	20
72×162	93	186	140	F8.5	75	20